Tool Setters for Horizontal Machining Centers [T26K Series]

Tool Setters for Horizontal Machining Centers T26K Series

T26K series, tool setters specialized for horizontal positioning

This series offer a tool length measurement sensor developed for horizontal machining centers.
It performs tool presetting, wear, chipping, and thermal displacement compensation in the horizontal direction, contributing to improved machining precision of machine tools.
Previously designed for vertical machining, the φ20 tool setter in this series is now smaller and can be positioned horizontally.

Catalog Download

Contact Form

Features

Larger contact-surface model capable of detecting from horizontal direction

The φ20 tool setter, previously designed for vertical machining, can now be positioned horizontally as well.

Supports tool measurement with high-speed contact

Built-in linear bearings allow the tool to be applied to the touch sensor at high speed, which contributes to shorter cycle for tool measurement.

Repeatability of 1μm and coolant-resistant IP67 protection rating spec.

It performs speedy and automatic tool measurement before starting machining and in-machine tool compensation during the machining cycle. The IP67 rating ensures high-precision detection even in adverse environments where coolant is applied, contributing to time savings in tool setting.

High reliability + Low cost: Fewer false detection achieved by touch sensor method

Since the detection is made by direct contact with the tool’s leading edge, coolant splatter or mist is less likely to interfere when comparing with expensive non-contact sensors (e.g., laser sensors), thus ensuring high reliability.

Main Specifications

Product Name	T26K
Purpose of use	Precise blade positioning / Detection of the wear and breakage
Contact diameter	Φ20
Repeatability	0.001ｍｍ　(Recommended operating speed of 50-200mm/min)
Protective structure	IP67
Contact life time	3 million
Pretravel	0.5mm
Stroke	6mm
Contact Force	2.5N
Cable	Oil resistant φ5.5/ 6 cores Tensile strength 30N, Minimum bending R7
Accessories	0
(Over travel signal) Output mode	NC (Normally closed）［About 2.5mm from skip signal］
(Over travel signal) Contact rating	DC24V 100mA Resistance load
Operating temperature range	0 - 60℃　(Ice-free)

Circuit diagram

Notes:

Please install a separate cover when high-pressure coolant or water jets are aggressively hitting the contact-surface or boot protection.
Intended coolant used is water-soluble coolant (alkaline).
Do not use at an operating speed of 10 mm/min or less.

Customization

The blue line part can be customized. Please refer to our brochure for details.

Standard Model

*This is the part number of the standard specification of the T26 series.
If you have not determined any specific specifications, please contact us about the following part number.

Product name	Contact diameter	Output mode	Direction of detection	Repeatability	Stroke	Contact life time	CAD
T26H-ST1	φ20	NC (Normally Closed)	1 direction	0.001ｍｍ	6	3 million	CAD(DXF)