Wireless Dimension Discrimination Switch for CNC Turret Lathes

Wireless Position Detection Touch Switch Position Detection Touch Switch
[RC-P10DX]

Prevents dimensional errors of workpieces in CNC Lathes

RC-P10DX realizes high-precision workpiece dimensional measurement and zero point setting of workpiece.
In-machine measurement contributes to preventing machining defects and reducing the workload of the inspection process. The wireless system can be mounted on turret lathes, 5-axis machines, pallet changers, rotary tables, and other locations where wired sensors have a high risk of disconnection.

  • High Precision
  • Wireless
  • Cost Reduction

Features

Quickly detects dimensional errors of the bar length and Prevent defective product outflow

Quickly detects dimensional errors of the bar length and Prevent defective product outflow

The length of the bar material before processing is fed back to the NC machine.
Pre-machining measurement prevents the occurrence of machining defects and eliminates the need for a full inspection after machining. Material waste and inspection man-hours are reduced.

Wireless, so it can be mounted on turret-type and 5-axis machining centers

Wireless, so it can be mounted on turret-type and 5-axis machining centers

Unlike ordinary touch switches, there are no cables, making it easy to install on turret-type and 5-axis machines where wiring is difficult.
There is no risk of wire breakage and no wiring work is required for maintenance or replacement.

Noise-resistant wireless communication 2.4GHz

Noise-resistant wireless communication 2.4GHz

Sensor can be mounted on turret lathe turrets, where wiring is difficult.
Constantly searches for wireless signal conditions and automatically selects the best channel. Ensures reliable wireless communication.

Related Articles

Related Articles

This article details the issues that can be solved with the Touch Switch RC-P10DX and the benefits of its introduction.

How to Eliminate L-Dimension Defects in Bar Material?

How to reduce bar length defects in processed products to zero [Touch Switch RC-P10DX]

Prevents defective length of bar material on turret lathe [Wireless Dimension Discrimination Switch]

Main Specifications

Purpose of use Prevents defective length of bar material on turret lathe
Contact diameter optionally available
Repeatability  1μm(2σ)*Feed speed 150mm/min
Measurement pressure 1N
Detection direction 1 direction
Over-travel amount 3mm
Contact signal 1-point NC
Frequency 2,404 to 2,476MHz
Number of units that can be connected One-to-one connection

Paired sensor and receiver communication
Protective structure IEC IP68
Operating environment For indoor use only
LED Display Sensor: 2 locations
Receiver: POWER、BATTERY、TOUCH、SIGNAL#1,#2,#3
Operating temperature range 5℃ to 50℃:20% to 80% (No condensation)
Sensor power supply 1/2 AA Lithium-thionyl chloride battery : 2 pcs

Recommended model No: LS14250 made by SAFT
Receiver power supply DC24V±10% MAX. 100mA
Notes. Use this product only for a flat surface.

Please inquire about available countries.
EU DECLARATION OF CONFORMITY EU DECLARATION OF CONFORMITY
Manual Manual (English)
Manual (Espanol)

Contact