NOTICE: Specification changes due to product improvements (from July 1st, 2015)

NEWS

Last Updated: (Publish)

We wish to inform you of following 4 specification changes.

■ Timing of implementation：For Parchase order from July 1st, 2015 onward
■ Product prices will not change due to the specification changes.

１）Modification of cable bush material for CS-touch switch series (NOTICE：QH095.pdf)
２）Modification of external dimensions for CSJ switch series (NOTICE：QH093.pdf)
３）Modification of transistor output (NOTICE：QH092.pdf)
４）Modification of rubber boot material (NOTICE：QH091.pdf)

１）Modification of cable bush material for CS-touch switch series

Cable bush material is changed from SUS made into resin made.

■Target products：
［CS-touch switches］

  • CS065A series　（not applicable for CS065A-R, cable direction 90°）
  • CS067A series　（not applicable for CS067A-R, cable direction 90°）
  • CSS60A series　（not applicable for CSS60A-R, cable direction 90°）

For more detail, please refer to NOTICE (PDF).

２）Modification of external dimensions for CSJ switch series

The whole length is shortened.

■Target products：
［CS-touch switch］

  1. CSJ055A series　（not applicable for CSJ055A-R, cable direction 90 degree）
  2. CSJS50A series　（not applicable for CSJS50A-R, cable direction 90 degree）

For more detail, please refer to NOTICE (PDF).

３）Modification of transistor output

The transistor output type will be improved to respond to rapid changes for environmental resistance in the market.

  1. Hot swap-compliant
  2. Enhanced transistor output device
  3. Short circuit protection of output line
  4. Enhanced noise characteristics resistance for power wire/output line

■Target products：
Transistor on-board products with TNA/TPA/TNB/TPB after the standard product
name.

e.g. P10DB TNA -A

  • □□□TNA（Output mode：NPN-NO）
  • □□□TNB（Output mode：NPN-NC）
  • □□□TPA（Output mode：PNP-NO）
  • □□□TPB（Output mode：PNP-NC）

For more detail, please refer to NOTICE (PDF).

４）Modification of rubber boot material

The rubber boot material will be modified due to improvement of environmental performance resistance to focus primarily on resistance to coolant.

*The rubber boot material is changed from special coated rubber into Fluorine rubber.
The color of the rubber boot is changed from creamy white into black.

■Target products :
［Ultra-precsion MT-touch switches］

・P10DA　　 　・P11GDB　　・P21EDB
・P10DB　　 　・P11GMB　　・P21EMB
・P10SA　　 　・P11DDB
・P10SB　　 　・P11DMB
・P10DLB 　 　・P11EDB
・P10DHLTB 　・P11EMB
・P10DHA　 　・P12DA
・P10DHB　 　・P12DB
・P10SHA 　　・P12DLB
・P10SHB

［CS-touch switch］

・CSCHP

For more detail, please refer to NOTICE (PDF).